
--> Version 3.013 / 15 May 2018 	
  - added read of "Tx Comp Gain", "Tx Bandwith" and "MIC Gain" from FDMDUO

--> Version 3.012 / 30 April 2018 
  - solved bug on VRX reinit on RX2 (audio and mode were not updated correctly)
  - added check "AF and IF Windows always on top" on the Graphics tab of the Settings window
  
--> Version 3.011 / 21 April 2018 
  - solved bug on VRX reinit (audio and mode were not updated correctly)
  - added checks on cat commands decoding
  
--> Version 3.010 / 09 April 2018 
  - added automatic switching of RX1 to Lock To CF when "Stand Alone = RX1" mode is activated from the "FDM-DUO Stand Alone Control" panel
  - corrected problem on "Reset Windows Position" functionality, it did not work if the main window was in Maximized Mode
  - added the initialisation of the transmission mode based on what was read by the FDM-DUO for all 4 receivers (previously it was only for RX1)

--> Version 3.009 / 06 April 2018 
  - now AF and IF windows stay on top
  - updated the Windows Default Positions function, added missing panels (Ctrl + Alt + R)
  - added the "Reset Windows Positions" button in the Setup->Graphics tab (equals to Ctrl + Alt + R)

--> Version 3.008 / 05 April 2018 
  - for FDMDUO: Lock to CF is now automatically activated for RX1 when "Stand Alone = RX1" is activated
    on the FDM-DUO Stand Alone Control panel
  - label improvements on FDM-DUO Stand Alone Control panel
  - IF windows positions are now saved correctly even if on another display

--> Version 3.007 / 04 March 2018 
  - solved bug on FDMDS1Config file management
  - solved ECSS bug on the Setup->Tuning tab
  - corrected the dimension of the ch1 and ch2 tables on the Setup->Tuning tab
  - added info about callstack on MessageBox displayed 

--> Version 3.006 / 30 March 2018 
  - solved bug on station memory management when L.O Frequency mode is selected
  - added an option that allows to use the SW2 also when wrong SN is found (a xml file with the "_WrongSN_type" sufix is created in this case)
  - the help window is now not modal (not blocking)
  - solved bug presents when opening the ADVANCED TX panel when the demodulation is not started

--> Version 3.005 / March 20, 2018 
  - fixed notch bugs;
  - resolved AGC bugs;
  - increased max audio devices to 200;

--> Version 3.004 / March 19, 2018 
  - added valid serial number check;
  - Setup - Advanced - Special Mode: change max freq to 165MHz;
  - Verify Notch freq value saved at startup;
  - Bug omnirig with CAT;

--> Version 3.003 / January 5, 2018 
  - Recording Timer Bug solved;

--> Version 3.002 / January 4, 2018 
  - solved TX button in advance setting;
  - Recording TImer Bug solved;
  - CAT Standard solved bug;
  - SWBC import correct Data values automatically;
  - solved Generic IF after exiting Transverter mode;
  - Unload Station Memory file bug solved;
  - on main form added the software version;
	
-> Version 3.000 / December 27, 2017
   - FDM-S3 support;	
  - Channel 2 support the CAT Slave mode (opt for two instances WSJT-X see APP NOTE n_6;	
  - FDM-S1 now works, new library installed;	
  - Introduction the possibility to Lock that can lock only Local Oscillator instead of all;		
  - Max number of soundcards 30;	
  - Profile setting improved;
  - N1MM xml files support;	
  - Mouse wheel direction programmable;	
  - About display improved;	
  - RTTY setting to USB on  DUO;	
  - Set Audio Volume 2 fractional value;

--> 1.171Beta 9 Nov 2017
	interfaccia per gestione FDMS3, installazione nuovi driver
--> 1.170Beta 20 Oct 2017
--> 1.168Beta 14 Sept 2017
--> 1.167Beta 01 Sept 2017
--> 1.166Beta 31 Aug 2017
--> 1.165Beta 21 June 2017
	- bugs on Adv panel for FDM-DUO
--> 1.164Beta 15 June 2017
	- adden N1MM option on Advanced Setup panel
--> 1.163Beta 07 June 2017
--> 1.162Beta 26 May 2017
	- bugs on DLL load for FDM-S2 Y9
--> 1.161Beta 12 May 2017
--> 1.160Beta 28 April 2017
--> 1.159Beta 26 April 2017
--> 1.158Beta 31 March 2017
--> 1.157Beta 15 March 2017
	- improvements Smeter for FDM-S1
--> 1.156Beta 25 February 2017
--> 1.154Beta 10 February 2017
--> 1.153Beta 10 February 2017
	- Manage FDMS3
--> 1.152Beta 10 February 2017
	- mode FT991/FT991A
--> 1.151Beta 03 February 2017
	- Added FT991 mode to PanAdapter panel (Advanced Setup)
	- Modified notch function
	- Added recognition FDM-s2\Y9 model
--> 1.150Beta 28 December 2016
	- Profile improvements
	- Web Soket: added on Setup form enable Server chekbox 
--> 1.149Beta 9 December 2016
	- Added WEB soket: HTTP/TCP command Protocol v 0.11
--> 1.148Beta 21 October 2016
	- OmniRig routine improvements (RX2 lock to VFOB)
	- Add Profile settings (on Graphic page setting): load Profile at starttup and save Profile before exit 
	- Improvement save IF windows position
	- Profile improvements: save DUO adv settings
	- Settings improvements: setup, DUO adv, and DUO sync windows position
--> 1.147Beta 13 October 2016
	- introductionof Profiles to store and loadthe state of the software for easy recalling  complex configurations
	(due to lot of configuration combination, the release is in Beta for a full debug)
	- Omnirig modification (still under construction) 
--> 1.146Beta 15 September 2016
	- Add Peak Persistence option on Spectrum Trace and IF trace (settings on Graphics Setup)
	- Enable Peak Persistence make MAx Hold disabled. Enable Max Hold make Peak Persistence disabled.
	- Add check 'Enable waterfall average' for spectrum and IF trace
	- Disabled Max Hold for Waterfall trace
	- Improvement save settings for IF trace
--> 1.145Beta  09 September 2016
	- Improvement TCP command Set Demodulation (MD)
--> 1.144Beta  22 August 2016
	- Improvement Ch 2 Equalizer
--> 1.143Beta  20 July 2016
	- New TCP Protocol v 0.10 (see documentation)
--> 1.142Beta  10 July 2016
	Improve Equalizer
--> 1.141Beta  06 July 2016 
	- New TCP Protocol v 0.08 (see documentation)
--> 1.140Beta  01 July 2016 
	improve StartRecording for schedeuled recording (no log for library)
--> 1.138Beta  22 June 2016 
	improve StartRecording for schedeuled recording
--> 1.136Beta  01 June 2016 
	Re-enabled last demod frequency, last demod mode, last demod bandwidth in .wav file header (only test)
	improve StartRecording for schedeuled recording
--> 1.135Beta  01 June 2016 
	Disabled last demod frequency, last demod mode, last demod bandwidth in .wav file header (only test)
--> 1.132Beta  02 May 2016 
	improve REC status occourences (Bug?)
	New Tcp Protocol v 0.7 
--> 1.131Beta  30 April 2016 Bug Transverter 
--> 1.130Beta  29 April 2016
	- logging of scheduled recording events from .dll in file .txt under C:\Users\<UserName>\Documents\ELAD\FDM-SW2\DspLib\
--> 1.129Beta  26 April 2016
--> 1.128Beta  18 April 2016
--> 1.126Beta  15 April 2016
	- logging of scheduled recording events in file .txt under C:\Users\<UserName>\Documents\ELAD\FDM-SW2\Recordings\
		=> this feature is enabled by default
		=> to disable log files, un-check 'Log Rec Events' option in scheduled recording dialog
	- New TCP server (v0_06): control added to manage when client connections reach max

--> 1.120Beta  24 February 2016
	- bug fixed on .wav file enumeration for file number > 999 (library)
	- in "REC Options" dialog box, recording filename length limited to 64 chars
	- in "REC Options" dialog box, recording filename fields format are better explained
	- in "Recording Name" dialog box, recording filename length limited to 64 chars
	- new large cross pointer
		=> right click on spectrum/waterfall -> "Mouse Cursor Type" -> "Large Cross"
	- vertical swap spectrum/waterfall 
		=> right click on spectrum/waterfall -> "Layout" -> "WaterFall + Spectrum" -> "Spectrum <> WaterFall"
	- option to set max number of wave file for single rec unlimited (library)
		=> set with file number = 0 in "REC Options" dialog box
	- fixed bug on rec-scheduler when max number of file is reached (library)
	- fixed bug on rec-scheduler (library)


--> 1.114Beta  30 December 2015
	- DUO: bug fixed for audio file play in FDMDUO Advanced Tx panel 
		1) play standard and elad audio files: 48 kHz, 16 bit PCM mono/stereo


--> 1.113Beta  18 December 2015
	- New guard on REC scheduler for daily recordings with more than 24 hours

--> 1.112Beta  18 December 2015
	- fixed new auto-notch parameters for software
	- dynamic-reconfiguration for all auto-notch settings (library)
	- DUO: fixed bug on FDMDUO Advanced Tx panel when peripheral Audio Input or Output is missing
	- DUO: fixed bug on max frequency limit in HF at 54 MHz
	- DUO: in FDMDUO Advanced Tx panel 
		1) specified audio file play only for 48 kHz, 16 bit stereo wav files
		2) loop option for played audio files
	- Adapted for DUOr
	- New TCP commands available: refer to FDM-SW2_TCPprotocol_v0.05 Document
		1) modified LF command
		2) new command to enable/disable SNAP and read SNAP status
		3) new command to set frequency steps (use in SNAP mode)
	- auto-reading software installation version and display on startup panel
	- guard on open/close routines for recordings files (library)
	- fixed bug on pause/play routines for recorded files (library)
	- fixed bug on RTTY
	- fixed bug crash on management of reading Eibi file null 



--> 1.107Beta  26 September 2015

	- label on Manual Notch filter even in REL(ative) mode show the Frequency no more Delta Frequency from Center
	- New TCP commands available:  refer to FDM-SW2_TCPprotocol_v0.03 Document
	- Guard on REC scheduler for daily recordings with more than 24 hours
	- corrected bug on filename on recording (Bill)
	- corrected bug crash on setting Manual Notch filters 


--> 1.105Beta  12 September 2015
	- improvement on Recording scheduler
	- introduction ABSolute and RELative mode on two Manual Notches
	  (Absolute Mode works as previous version, changing tuning remain same (absolute value) frequency, 
	  RELative mode works in the fixed offset position related to Spectrum Center Frequency value.

 
	
